2024 Land Pride RC3715 Series RC3715

Information

2024 Land Pride RC3715 Series RC3715

Land Pride's RC3715 (RCM3715) is identical to the RC3712, simply 3 feet wider. The tire offering on the RC3715 is expanded to 4, 6, or 8 tires in 4 sizes, including our new 26" laminated tire. Deck rings are available as well as fold options that allow for narrow transport or independent control of the wings.

Features may include:

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

3" CUTTING CAPACITY

These cutters offers 3" cutting capacity. See Operator's Manual for more information.

ADJUSTABLE JACK ANGLE

Helps keep park jack vertical when in use.

LED SIGNAL LIGHTS

LED lights are bright, long lasting and resistant to vibration, unlike the incandescent lights.

BEVELED SKID SHOES

Wing skid shoes are flanged up along length of outside edge. This allows operator to turn without leading edge of wing skid shoes digging into the ground.

3/16" STUMP JUMPER

Standard 3/16" thick stump jumper material keeps damage to a minimum.

NARROW TRANSPORT

Fold options allow for narrow transport or independent control of the wings.

SLIDING CENTER SHIELD

Sliding center shield offers ease-of maintenance for slip-clutches and U-joints.

Photos

Highlights

  • Wainfleet, Ontario
  • 2024
  • Land Pride
  • RC3715 Series RC3715
  • Available
  • Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) (Varies by tire option)

Specifications

  • 2024
  • Land Pride
  • RC3715 Series
  • RC3715
  • Rotary Cutters
  • Horsepower range: 50 - 160 hp (37.3 - 119.3 kw)
  • Gear Lube 80-90W EP
  • Input 540 & 1000 rpm: Cat. 6 with constant velocity u-joint with or without overrunning clutch | Intermediate: Category 4 with slip-clutch | Wing: Category 4 with slip-clutch or Category 5 with slip-clutch
  • horsepower: 540 rpm or 1000 rpm 160 hp (119.3 kw) Divider and 130 hp (96.9 kw) Center & Wings
  • 21" or 26" Laminated tires / 25.5" New foam filled tires / 25.5" New 20-ply pneumatic tires / 29" Used aircraft tires | Number of: 4 - Wheels: Two on transport axle and one on each wing axle / 6 - Wheel option: Four on transport axle and one on each wing axle / 8 - Wheel option: Four on transport axle and two on each wing axle
  • Blade tip - At 540 rpm: Center Blades = 15,268 FPM (77.6 mps) & Wing Blades = 15,000 FPM (76.2 mps) / At 1000 rpm: Center Blades = 15,578 FPM (79.1 mps) & Wing Blades = 14,620 FPM (74.3 mps)
  • Swivel Clevis Hitch, LP Performance Hitch, Bar-Tite Hitch, Ball Hitch, or Pintle Hitch
  • tongue: 5" x 3" (12.7 cm x 7.6 cm) rectangular tubing
  • Signal: LED (light-emitting diode) | 7 Pin connector: SAE J560 pin configuration
  • Cutting capacity: 3" (7.6 cm) | Lift hydraulics: 3" x 8" hydraulic cylinder, hoses, fittings & stroke control spacers | Wing hydraulics: 2 1/2" x 12" hydraulic cylinders, hoses & fittings | Wing flex while operating: Max. 20o down, can float up as needed as long as the wheel(s) are still on the ground | Wing transport protection: Wing Transport Lock Pins | Side skirt thickness: 1/4" (6 mm) | Blades - 6 (2 per carrier): 1/2" x 4" (1.3 cm x 10.2 cm) Heat-treated, free-swinging alloy steel with uplift | Blade overlap: 6" (15.2 cm) | Stump jumper / blade holder: 3/16" (5 mm) Thick round dish shaped pan, reinforced with 1" x 4" (2.5 x 10.2 cm) blade bar | LP Performance hitch & Bar tite hitch pivot shaft diameter: 2 1/4" (5.7 cm)
  • 15’-0" (4.57 m)
  • 15’-10" (4.83 m)
  • with 21" tires: 10’-3" (3.12 m) (Single acting fold option) 7’-3" (2.21 m) (Dual acting fold option)
  • 16'-3" (4.95 m) (With center deck raised fully up)
  • 12" (30.5 cm)
  • Cutting: 1-1/2" - 16" (3.8 cm - 40.6 cm) (Varies by tire option)
  • Gearbox: Splitter: 3.5 pints (1.66 L); Center deck & Wings: 6 pints (2.84 L)
  • Skid shoes: Wing Deck: 1 Replaceable skid shoe per wing / Center Deck: 2 Replaceable skid shoes | Blade bolt: Keyed with hardened flat washer & locknut | Transport axle: Spring-cushioned on center transport axle
  • Machine Total: 4,380 lbs (1986.7 kg) / Tongue: 1,594lbs (723.0 kg)
  • thickness: 10 Gauge (3.4 mm)
  • Side skirt thickness: Steel
  • Cast iron five-bolt hubs with tapered roller bearings and 1 3/4" (4.4 cm) shafts