2024 Land Pride RCF20 Series RCF2060

Information

2024 Land Pride RCF20 Series RCF2060

Land Pride's RCF20 Series features a smooth top for easier cleaning and a floating top link for following ground undulations in grass, weeds, and light brush up to 2" in diameter. The RCF20 is ideal for rural acreage or farm grass maintenance. These cutters have a Category 1 3-Point hitch that are Quick Hitch adaptable. The standard ASAE Category 3 driveline is offered with either shear bolt or slip-clutch protection and the tailwheel is offered laminated or solid rubber.

Features may include:

QUICK-HITCH COMPATIBLE

Our Quick-Hitch System allows you to quickly connect and disconnect from the implement - most without leaving the tractor seat. This is a real time saver when working on multiple projects.

GEARBOX WARRANTY

5 Year Limited Gearbox Warranty demonstrates our confidence in the gearbox's quality and lasting performance.

2" CUTTING CAPACITY

These cutters offers 2" cutting capacity. See Operator's Manual for more information.

FLOATING TOP LINK

Provides for easy hook-up. Permits deck to follow the terrain for an even cut. Two hole position to allow greater lift leverage for smaller tractors.

10 GAUGE STUMP JUMPER

Standard round stump jumper slides over stumps, rocks, and debris.

EXTENDED CUTTER FRONT

Extended cutter front allows for increased material flow and added protection.

Photos

Highlights

  • Wainfleet, Ontario
  • 2024
  • Land Pride
  • RCF20 Series RCF2060
  • Available
  • Cutting: 1 1/2" to 12" (3.8 cm to 30.5 cm)

Specifications

  • 2024
  • Land Pride
  • RCF20 Series
  • RCF2060
  • Rotary Cutters
  • Recommended Tractor: 20-65 hp (14.9-48.5 kw)
  • Gearbox: EP 80-90W oil
  • 1:1.93
  • ASAE Category 3
  • Tailwheel Mount: Welded A-arm and caster fork with 360 degree swivel
  • Power Take-Off: 540 rpm | Blade Tip: 16,363 FPM (83.1 mps)
  • Category l with floating top linkage, Quick Hitch ready
  • Cutting Capacity: 2" (5.1 cm) Diameter | Gearbox Construction: 1 3/8" (3.5 cm) - 6 spline input shaft and 2" (5.1 cm) output shaft | Stump Jumper: 10 GA. x 24" (3.4 mm x 61.0 cm) Round Pan with 1" (2.5 cm) thick blade holder bar | Blades (2): 1/2" x 3" x 25" (13 mm x 7.6 cm x 63.5 cm) Heat treated alloy steel free-swinging high lift
  • 60" (1.52 m)
  • 65" (1.65 m)
  • 98" (2.49 m)
  • Bottom of Deck to Bottom of Skid Shoe: 9 11/16" (24.6 cm)
  • Cutting: 1 1/2" to 12" (3.8 cm to 30.5 cm)
  • Gearbox: 4.5 Pints (2.13 L)
  • Machine: 620 lbs (281.2 kg)
  • Machine: With laminated tailwheel, slip clutch driveline, Front Rubber Guards and Rear Metal Band. | Skid Shoes: Full length weld-on skid shoes | Blade Bolts: Keyed with harden flat washers & locknuts. | Rear Guard: Metal Band
  • Gearbox: Speed-up beveled gears, cast iron housing
  • All welded deck | Deck Material Thickness: 10 Gauge (.134")(3.4 mm) | Side Skirt Material Thickness: 10 Gauge (.134")(3.4 mm)